Bayer logo
title-navbarsubtitle-navbar
search
  • mybayer-btn
    • Brand LogoHerbicide

    Roundup Xtend 2 with VaporGrip Technology

    Roundup Xtend® 2 herbicide with VaporGrip® Technology is a farm-tough weed control solution custom tailored to optimize results with the Roundup Ready® Xtend Crop System. Roundup Xtend 2 delivers the same level of control growers trust from the original Roundup Xtend with the benefits of a higher concentrated formulation for greater ease of use. It delivers cutting-edge performance to give you exceptional control over a broad spectrum of costly, hard-to-control weeds, to get the best results possible for your soybean or corn crops.
    fact_check

    fs-approved-use: AB, BC, MB, NB, NL, NS, ON, PE, QC, SK

    info_outline

    fs-bayervalue-banner-section

    fs-herbicide-button-label

    title-product-highlights

    •

    Easy to use pre-mixed combination of glyphosate and dicamba

    •

    Higher concentrated formulation

    •

    Dual modes of action in the convenience of a pre-mix

    •

    Fights against herbicide resistance (including control of glyphosate-resistant weeds)

    •

    Reduced volatility through VaporGrip technology

    •

    Unlocks full potential of Roundup Ready Xtend Crop System

    •

    Reduces early-weed competition through short-term soil residual activity

    •

    Simple and economical to use

    product-details-heading

    cropscategorygroups-active-ingredientsformulation-typepackaging
    •

    Roundup Ready 2 Xtend Soybeans

    •

    Corn, Field With Smartstax RIB Complete Technology

    •

    Corn, Field With Trecepta RIB Complete Technology

    •

    Broadleaf & Grass Weeds

    Group 9 Glyphosate
    Group 4 Dicamba

    Water soluble liquid

    •

    10 L jug = 7 ac.

    •

    450 L tote = 300 ac.

    crops
    •

    Roundup Ready 2 Xtend Soybeans

    •

    Corn, Field With Smartstax RIB Complete Technology

    •

    Corn, Field With Trecepta RIB Complete Technology

    category
    •

    Broadleaf & Grass Weeds

    groups-active-ingredients

    Group 9 Glyphosate
    Group 4 Dicamba

    formulation-type

    Water soluble liquid

    packaging
    •

    10 L jug = 7 ac.

    •

    450 L tote = 300 ac.

    weeds-controlled
    •

    Field bindweed

    •

    Annual bluegrass

    •

    Downy brome

    •

    Tartary buckwheat

    •

    Wild buckwheat

    weeds-controlled
    •

    Field bindweed

    •

    Annual bluegrass

    •

    Downy brome

    •

    Tartary buckwheat

    •

    Wild buckwheat

    title-use-mixing

    title-use-mixing
      table-content-cropNametable-content-pests-herbicidetable-content-stagetable-content-ratetable-content-notes
      Roundup Ready 2 Xtend or XtendFlex soybeans (pre-plant or pre-emergence)
      		Please refer to label for complete list of weeds controlled and suppressed.
      		Up to V2 stage
      		0.8, 1.14 or 1.5 L/ac*
      		Ensure corn seeds are placed at least 4 cm below the soil surface. If seeded less than 4 cm below the soil surface, delay application until the spike stage.
      Field Corn with Roundup Ready 2 Technology, SmartStax® RIB Complete® Technology, VT Double PRO® RIB Complete® Technology or Trecepta® RIB Complete® Technology (pre-emergence only)
      		Please refer to label for complete list of weeds controlled and suppressed.
      		Up to 5- leaf
      		0.8, 1.14 or 1.5 L/ac*
      		Do not apply to corn over 50 cm in height
      Refer to herbicide sensitivity ratings in seed guides to ensure crop safety with dicamba

      info

      Footnotes
      • *The 1.5 L/ac. rate can be used only once in a season and should be applied pre-plant (soybeans only), pre-emergence (soybeans and corn) or in-crop early post-emergence (soybeans and corn) (up to the V2 growth stage in soybeans and up to the 5-leaf growth stage in corn).

      Spray quality/nozzle selection: Extremely Coarse (XC) to Ultra Coarse (UC) droplets
      Target weed size: Less than 10 cm (4 in.) tall
      Ground speed: Less than 25 km/h (15 mph)
      Boom height: No higher than 50 cm (20 in.) above canopy or target weeds
      Wind speeds: 5-15 km/h
      Maintain label buffer
      Ammonium sulfate (AMS) and ammonium-based additives are not authorized
      Do not spray if sensitive crops are down wind
      Corn treatment notes:
      Do not apply to sweet corn, corn grown for seed production, or corn without Roundup Ready 2 Technology
      When applying Roundup Xtend 2 with VaporGrip Technology adjacent to sensitive crops, apply as a pre-emergence treatment to avoid potential drift onto these sensitive crops.
      Apply to medium to fine textured soils containing more than 2.5% organic matter. Do not use on sandy or sandy loam soils.
      Avoid direct chemical contact with the corn seed. If you plan to apply Roundup Xtend 2 with VaporGrip Technology pre-emergence, ensure the corn seeds are placed at least 4 cm below the soil surface. If seeded less than 4 cm below the soil surface, delay application until the spike stage.
      Do not incorporate
      Do not apply to corn over 50 cm in height. Measure the corn as it stands, not leaf-extended
      Soybean treatment notes:
      To maximize residual weed control benefits, the preferred application window for 1.5 L/ac. rate is up to V2 stage
      Water volume: Minimum 10 GPA (100 L/ha) (15 GPA if using a drift reduction additive (DRA))
      Spray quality/nozzle selection: Extremely Coarse (XC) to Ultra Coarse (UC) droplets
      Target weed size: Less than 10 cm (4 in.) tall
      Ground speed: Less than 25 km/h (15 mph)
      Boom height: No higher than 50 cm (20 in.) above canopy or target weeds
      Wind speeds: 5-15 km/h
      Maintain label buffer
      Ammonium sulfate (AMS) and ammonium-based additives are not authorized
      Do not spray if sensitive crops are down wind
      Corn treatment notes:
      Do not apply to sweet corn, corn grown for seed production, or corn without Roundup Ready 2 Technology
      When applying Roundup Xtend 2 with VaporGrip Technology adjacent to sensitive crops, apply as a pre-emergence treatment to avoid potential drift onto these sensitive crops.
      Apply to medium to fine textured soils containing more than 2.5% organic matter. Do not use on sandy or sandy loam soils.
      Avoid direct chemical contact with the corn seed. If you plan to apply Roundup Xtend 2 with VaporGrip Technology pre-emergence, ensure the corn seeds are placed at least 4 cm below the soil surface. If seeded less than 4 cm below the soil surface, delay application until the spike stage.
      Do not incorporate
      Do not apply to corn over 50 cm in height. Measure the corn as it stands, not leaf-extended

      table-content-grazingFeeding
      Do not permit lactating dairy animals to graze fields within 7 days after application
      Do not harvest forage or cut hay within 30 days after application
      Withdraw meat animals from treated fields at least 3 days before slaughter

      Minimum 10 GPA (100 L/ha)
      (15 GPA if using a drift reduction additive (DRA))

      For a list of permissible tank-mix partners and mixing order, please refer to the product label.

    title-additional-guidelines

      Allow at least 120 days for those crops not on the Roundup Xtend 2 label. Do not count days when the ground is frozen. Moisture is essential for the degradation of this herbicide in soil. If dry weather persists after application, crop injury may occur the following spring.

      Store above -10C to remain in solution

      Resistance management recommendations
      For resistance management, Roundup Xtend 2 with VaporGrip Technology is a Group 4 and 9 herbicide. Any weed population may contain or develop plants naturally resistant to Roundup Xtend 2 with VaporGrip Technology and other Group 4 or 9 herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly in the same field. Other resistance mechanisms that are not linked to site of action, but specific for individual chemicals, such as enhanced metabolism, may also exist. Appropriate resistance-management strategies should be followed.
      To delay herbicide resistance
      - Where possible, rotate the use of Roundup Xtend 2 with VaporGrip Technology or other Group 4 or Group 9 herbicides within a growing season (sequence) or among growing seasons with different herbicide groups that control the same weeds in a field.
      - Use tank mixtures with herbicides from a different group when such use is permitted. To delay resistance, the less resistance-prone partner should control the target weed(s) as effectively as the more resistance-prone partner.
      - Herbicide use should be based on an integrated weed management program that includes scouting, historical information related to herbicide use and crop rotation, and considers tillage (or other mechanical control methods), cultural (for example, higher crop seeding rates; precision fertilizer application method and timing to favour the crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices.
      - Monitor weed populations after herbicide application for signs of resistance development (for example, only one weed species on the herbicide label not controlled). If resistance is suspected, prevent weed seed production in the affected area if possible by an alternative herbicide from a different group. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean seed.
      - Have suspected resistant weed seeds tested by a qualified laboratory to confirm resistance and identify alternative herbicide options
      - Contact your local extension specialist or certified crop advisors for any additional pesticide resistance-management and/or integrated weed-management recommendations for specific crops and weed biotypes

    recommended-agronomy-resources

    featured
    ARTICLE

    Roundup - FAQ

    featured
    ARTICLE

    Soybean Growth and Development

    featured
    ARTICLE

    Cereal Growth Stages and the Application of Herbicides and Fungicides

    MyBayer

    Log in to your account to see your BayerValue™ Rewards details, past purchases, and more.
    launchLog In
    article image