Trilex EverGol SHIELD is a concentrated product allowing the treater to control water volume and to optimize application volume and ensure uniform coverage
- Puts complete control in the grower’s or applicator’s hands
- Recommend a 7:1 dilution ratio (carrier to product) that can be adjusted depending on seed wetness, other mix partners and seed/environmental conditions
- Low seed moisture content – increase water volume to ensure no further damage is done to seed coat and resulting germination & vigour
- Easy clean up
- Convenient packaging for both on-farm and commercial treaters
Application Tips:
- Always ensure proper mixing of the products before application
- Once mixed with water, Trilex EverGol SHIELD has similar flow characteristics to water, resulting in ease of application
- Always wear personal protective equipment when handling seed treatments or treated seed
- Always calibrate seeding equipment with treated seed, as seed flow can be affected
| Trilex EverGol SHIELD Rate |
| Trilex Component A |
25 mL/100 kg seed |
| Trilex Component B |
16 mL/100 kg seed |
| Stress Shield |
104 mL/100 kg seed |
| Trilex EverGol SHIELD Packaging |
| Trilex Component A |
1.5 L jug |
Treats 221 bu. based on 60 lbs/bu. |
| Trilex Component B |
0.96 L jug |
| Stress Shield |
6.25 L jug |
Mixing Instructions:
For best results add ½ of the carrier or water in a 7:1 ratio of water to product. Next add Trilex Component A, then Trilex Component B, then Stress Shield and fill with the remaining water. Agitate and apply. Re-agitate before each application.
Always ensure proper mixing prior to application.
Always calibrate seeding equipment with treated seed as flow can be affected.
When adding in micronutrient, reduce the amount of water needed by the volume of micronutrient added. Check with nutrient manufacturer for compatibility.
